- 0091-022-66362797 / +91-9821025398
- ngchouhan@gmail.com / ganpatmetal03@gmail.com
Ganpat Metal supplies SA 209 T1 seamless alloy steel tubes for industrial boiler and heat-transfer applications. Specified under ASTM A209/ASME SA-209, T1 is a molybdenum-chromium alloy steel grade with defined chemical composition and mechanical properties. Its material requirements make grade identification important when sourcing tubes for equipment manufacturing, maintenance and replacement work.
Industrial buyers can enquire about SA 209 T1 tubes with the required outside diameter, wall thickness, length and inspection documentation. Contact Ganpat Metal to discuss your specifications, order quantity and pricing.
GM SA 209 T1 seamless alloy steel tubes are intended for procurement requirements involving alloy steel boiler tubing specified to the applicable ASTM A209/ASME SA-209 standard. The supplied reference identifies material designation T1 and material number K11547, with chromium and molybdenum content specified alongside carbon, manganese, silicon, phosphorus and sulfur limits.
For buyers sourcing this grade, the distinction between the required material specification, tube dimensions and mechanical properties is essential. Ganpat Metal handles enquiries for SA 209 T1 tubes based on the grade and dimensional details required for the intended equipment.
| Parameter | Specification |
|---|---|
| ASTM standard | ASTM A209 |
| ASME standard | ASME SA-209 |
| Grade | T1 |
| Material number | K11547 |
| Material category | Chromium-molybdenum alloy steel |
| Tube manufacturing type | Seamless |
| Supplied seamless tube OD range | 6.35–101.60 mm |
| Additional dimensional range in supplied reference | OD 6–2,500 mm; wall thickness 1–200 mm |
| Wall thickness range also listed | 3–15 mm |
| Schedules | STD, SCH 40, SCH 80 |
| Length | 1–12 m maximum, as stated in the supplied reference |
| Length options | Single random, double random and cut length |
| Forms listed | Round, square, rectangular and hydraulic |
| Tube ends | Plain end, bevelled end and threaded |
| Specialisation stated in reference | Large-diameter sizes |
| Equivalent standards listed in reference | EN 10216-2, ASTM A335, GOST 550-75 |
| Equivalent materials listed in reference | P2, 12ChM, 12CrMo |
The chemical composition below follows the supplied reference for SA 209 T1 alloy steel tubes.
| Chemical Element | Composition (%) |
|---|---|
| Carbon (C) | 0.10–0.20 |
| Manganese (Mn) | 0.30–0.61 |
| Phosphorus (P) | 0.025 max. |
| Sulfur (S) | 0.025 max. |
| Silicon (Si) | 0.10–0.30 |
| Chromium (Cr) | 0.50–0.81 |
| Molybdenum (Mo) | 0.44–0.65 |
| Mechanical Property | Requirement |
|---|---|
| Tensile strength | 379 MPa minimum |
| Yield strength | 207 MPa minimum |
| Elongation | 30% minimum |
| Hardness | 80 HB maximum |
| Dimension or Configuration | Supplied Reference |
|---|---|
| Seamless tube outside diameter | 6.35–101.60 mm |
| Additional outside diameter range | 6–2,500 mm |
| Additional wall thickness range | 1–200 mm |
| Separately listed wall thickness | 3–15 mm |
| Schedules | STD, SCH 40, SCH 80 |
| Length options | Single random, double random and cut length |
| Maximum length stated | 1–12 m |
| End preparation | Plain, bevelled and threaded |
| Forms listed | Round, square, rectangular and hydraulic |
SA 209 T1 is specified as seamless tubing in the supplied product reference. The following configurations are listed for enquiries and should be matched to the applicable product scope.
| Type / Finish | Description |
|---|---|
| Seamless SA 209 T1 Tubes | Tubes specified to the applicable ASTM A209/ASME SA-209 grade and manufacturing requirements. |
| Standard and Scheduled Tubes | STD, SCH 40 and SCH 80 are listed in the supplied reference; confirm the dimensional standard and actual wall thickness before ordering. |
| Cut-Length Tubes | Lengths prepared to the agreed order dimensions. |
| Single Random Lengths | Tubes supplied in a single-random-length configuration where available. |
| Double Random Lengths | Tubes supplied in a double-random-length configuration where available. |
| Plain-End Tubes | Tubes with plain ends for the specified joining or fabrication process. |
| Bevelled-End Tubes | Tubes with bevelled ends where required for the intended joint preparation. |
| Threaded Ends | Threaded configurations only where compatible with the tube specification and intended use. |
Round, square, rectangular and hydraulic forms also appear in the supplied reference. Their applicability to the SA 209 T1 grade should be confirmed before they are represented as standard offerings.
Length Options: Single Random Length, Double Random Length, Cut Length (1–12 m max)
SA 209 is associated with seamless alloy steel boiler and superheater tubes. SA 209 T1 enquiries should therefore focus on equipment and installations whose engineering specifications call for this grade.
The correct grade depends on design temperature, pressure, code requirements and the equipment manufacturer's material selection. SA 209 T1 should not be treated as interchangeable with other alloy steel grades solely because their applications appear similar.
For alloy steel boiler tube procurement, the inspection scope should establish that the supplied material matches the ordered grade and applicable standard.
Ganpat Metal is ISO certified and MSME registered. Confirm the specific certificates, test records and inspection arrangements required for the order before finalising procurement.
Contact Ganpat Metal with the required SA 209 T1 specification to discuss availability and commercial terms.
Ganpat Metal handles enquiries from industrial buyers in India looking for SA 209 T1 seamless alloy steel tubes. For boiler and heat-transfer procurement, the material designation, dimensional range and mechanical requirements should align with the equipment specification rather than being selected from a generic alloy steel description.
Include the required outside diameter, wall thickness, length, quantity and applicable ASTM or ASME specification in your enquiry. These details help establish the intended product scope and documentation requirements.
Ganpat Metal handles export enquiries for industrial metal products from India. The countries covered by export enquiries include:
India
Brazil
New Zealand
Australia
Bangladesh
Malaysia
UAE
Saudi Arabia
Oman
Egypt
Spain
Russia
Kazakhstan
International buyers can provide the required grade, tube dimensions, quantity, inspection documentation and destination country when requesting a quotation. Export arrangements and delivery schedules depend on the confirmed product scope and order.
For an SA 209 T1 tube quotation, share the following details with Ganpat Metal:
Contact Ganpat Metal to discuss SA 209 T1 seamless alloy steel tube requirements. For other alloy steel tube grades and product requirements, visit our Alloy Steel Tubes category to review the wider range.
